Full Range Mode With Subwoofer - KLING & FREITAG LINE 212-6-SP User Manual

User's Manual

11.1.2 Full Range Mode with Subwoofer

You can link the input signal (for example from the mixer) from one loudspeaker to
another. It makes no difference whether the input signal reaches the bass speaker first
and is then transmitted to the mid-high speaker or the other way around.
If you need a high-boost for covering larger distances (compensation of high frequency
attenuation), then increase the '
If the mid-high systems are operated in a cluster (speakers are set up directly next to one
another), then lower the '
AC ~ 16 A max.
Channel 1
INPUT
Channel 2
KLING & FREITAG GMBH ©2003 - 2006
EQ HIGH BOOST'
EQ LOW CUT'
frequency as described below!
Frequency
Quality (Q)
Bandwidth (oct.)
Level
To next
'SP'-Top
or Sub
LINE
AC-MAINS
LINE
AC-MAINS
AC ~ 16 A max.
The switch 'FILTERS' on The switch 'FILTERS' on
The switch 'FILTERS' on The switch 'FILTERS' on
the SP speaker must be at the SP speaker must be at the SP speaker must be at the SP speaker must be at
'ON' in this mode. 'ON' in this mode. 'ON' in this mode. 'ON' in this mode.
frequency as in the following table!
EQ HIGH BOOST EQ LOW CUT
14000Hz
2.6
0.55
+4.4dB
LINE
AC-MAINS
LINE
AC-MAINS
Version 4.1, 19.06.2006
LINE 212-6 - SP / LINE 212-9 - SP
120Hz
0.55
2.35
-2.95dB
To next
'SP'-Top
or Sub
Page 26 of 45