KLING & FREITAG LINE 212-6-SP User Manual page 8

User's Manual
Modes of Operation
− Operations without external controller:
with activated filters (FILTERS 'ON'), all K&F models in the 'SP Series' are combin-
able with one another by simply linking the signal from one speaker to the next.
− With optional K&F system controller*:
with system plug-in cards via the K&F Controller C2 or an Audio DSP*
− if used with BSS Soundweb, FDS 366, 336, 334, and XTA DP 226, 224, K&F sys-
tem parameters are available upon request
* The operation of the K&F 'SP' models with Controller C2 or Audio DSP is recom-
mended for uses in which special filter presets are advisable, i.e. in combination with
passive systems of the 'CA Series', in cluster operations (top low cut), when bass and
high boost are necessary, adjustment to the room acoustics (EQ), etc.
The following K&F 'SP' speakers are available:
Full-range systems:
Subwoofers:
KLING & FREITAG GMBH ©2003 - 2006
CA 1001 - SP,
CA 1201 - SP,
CA1215-6 - SP, CA 1215-9 - SP
CA 1515-6 - SP, CA 1515-9 - SP
LINE 212-6 - SP, LINE 212-9 -- - SP
SW 112 - SP, SWi 112 - SP,
SW 115E - SP, SWi 115E - SP,
SW 118E - SP, SWi 118E - SP,
SW 215E - SP
Version 4.1, 19.06.2006
LINE 212-6 - SP / LINE 212-9 - SP
Page 8 of 45