Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for KLING & FREITAG VIDA M Series
Summary of Contents for KLING & FREITAG VIDA M Series
- Page 1 EN | | VERSION 1.1 | 08/19/2019 USER‘S MANUAL K&F VIDA M...
-
Page 3: Table Of Contents
User‘s Manual K&F VIDA M Table of Content Chapter / Content Page Introduction 1.1 Icons Used 1.2 About this user's manual Product Description 2.1 Intended Use 2.2 Versions 2.3 System requirements 2.4 Items Included 2.4.1 Items Included VIDA M 110 / 110 S 2.4.2 Items Included VIDA M 220 / 220 S 2.5 Overview of VIDA M 110 / 110 S Parts 2.6 Overview of VIDA M 220 / 220 S Parts... - Page 4 User‘s Manual K&F VIDA M 7.1.3 Setting up Dante latency with an additional hop Initial Operation Updates 9.1 Firmware Update 9.2 Dante Update 10 Care and Maintenance 11 Transportation and Storage 12 Disposal 12.1 Germany 12.2 EU, Norway, Iceland, and Liechtenstein 12.3 All Other Countries 13 EC Declaration of Conformity Page 4 of 4...
-
Page 5: Introduction
User's Manual K&F VIDA M Introduction Icons Used This icon indicates a risk of injury or death. Not following these instructions may result in seri- WARNUNG ous health problems including potentially fatal injuries. This icon indicates a possibly dangerous situation. Not following these instructions may cause VORSICHT minor injuries or damage. -
Page 6: Product Description
User's Manual K&F VIDA M VIDA M 19.08.2019 08/19/2019 Product Description Intended Use Be sure to use the VIDA M speaker system for stationary indoors installations only. The system is not designed for repeated assembly, reconfiguration, disassembly, or transport. Risks imposed by falling or overturning parts WARNUNG Be sure to install, suspend, fasten, and use Kling &<###Space: 1##>Freitag speakers only us- ing the designated fixtures as specified in this document. -
Page 7: System Requirements
User's Manual K&F VIDA M System requirements • Mounting hardware • Computer running Windows 8, 8.1, or 10 • VIDA App The VIDA App required for setting up the speaker system is freely available at the Win- dows Store. For this purpose, visit the Microsoft App Store and search for VIDA App. For more information, refer to the VIDA App User's Manual, which is available for down- load at our website. -
Page 8: Overview Of Vida M 110 / 110 S Parts
User's Manual K&F VIDA M VIDA M 19.08.2019 08/19/2019 Overview of VIDA M 110 / 110 S Parts Inlet for connecting mounting hardware (also available at the bottom) Bores for fastening mounting hardware. Can be sealed using the supplied caps when not in use. -
Page 9: Overview Of Vida M 220 / 220 S Parts
User's Manual K&F VIDA M Overview of VIDA M 220 / 220 S Parts Passive module Inlet for connecting mounting hardware (bottom inlet for con- necting the active module) Bores for fastening mounting hardware. Can be sealed using the supplied caps when not in use. -
Page 10: Front-Panel Indicator
User's Manual K&F VIDA M VIDA M 19.08.2019 08/19/2019 Front-panel indicator Each VIDA M features an LED indicator located behind the front grille. You can turn the LED on and off using the VIDA App in order to identify a specific VIDA M speaker. The indicator color shows the following statuses: •... -
Page 11: Accessories
User's Manual K&F VIDA M Accessories VIDA M wall bracket VIDA M flying frame VIDA M adapter, suitable for VIDA M 110 / 110 S © KLING & FREITAG GMBH Version 1.1 Page 11 of 40... -
Page 12: Dimensions
User's Manual K&F VIDA M VIDA M 19.08.2019 08/19/2019 Dimensions 2.9.1 Dimensions VIDA M 110 / 110 S Page 12 of 40 Version 1.1 © KLING & FREITAG GMBH... -
Page 13: Dimensions Vida M 220 / 220 S
User's Manual K&F VIDA M 2.9.2 Dimensions VIDA M 220 / 220 S © KLING & FREITAG GMBH Version 1.1 Page 13 of 40... -
Page 14: Technical Specifications
User's Manual K&F VIDA M VIDA M 19.08.2019 08/19/2019 2.10 Technical Specifications 2.10.1 Technical Specifications VIDA M 110 Active 2-way coaxial line array with electronic beam Concept steering Input signal Each speaker is fed through a dedicated DSP/amp channel. Frequency range @-10 dB 95 Hz –... -
Page 15: 2.10.2 Technical Specifications Vida M 110 S
User's Manual K&F VIDA M 2.10.2 Technical Specifications VIDA M 110 S Active 2-way coaxial line array with electronic beam Concept steering Input signal Each speaker is fed through a dedicated DSP/amp channel. Frequency range @-10 dB 95 Hz – 22 kHz Frequency range @±3 dB 125 Hz –... -
Page 16: 2.10.3 Technical Specifications Vida M 220
User's Manual K&F VIDA M VIDA M 19.08.2019 08/19/2019 2.10.3 Technical Specifications VIDA M 220 Active 2-way coaxial line array with electronic beam Concept steering Input signal Each speaker is fed through a dedicated DSP/amp channel. Frequency range @-10 dB 95 Hz – 22 kHz Frequency range @±3 dB 125 Hz –... -
Page 17: 2.10.4 Technical Specifications Vida M 220 S
User's Manual K&F VIDA M 2.10.4 Technical Specifications VIDA M 220 S Active 2-way coaxial line array with electronic beam Concept steering Input signal Each speaker is fed through a dedicated DSP/amp channel. Frequency range @-10 dB 95 Hz – 22 kHz Frequency range @±3 dB 125 Hz –... -
Page 18: Measuring Diagrams
User's Manual K&F VIDA M VIDA M 19.08.2019 08/19/2019 2.11 Measuring Diagrams Horizontal Directivity 180° 150° 120° 90° 60° Attenuation (dB) 30° < 3 0° 3 - 6 -30° 6 - 9 -60° 9 - 12 -90° 12 - 15 -120° 15 - 18 -150°... - Page 19 User's Manual K&F VIDA M Vertical Directivity, optimised 150° 120° 90° 60° Attenuation (dB) 30° < 3 0° 3 - 6 -30° 6 - 9 -60° 9 - 12 -90° 12 - 15 -120° 15 - 18 -150° > 18 -180° Frequency [Hz] Frequency response ‘on axis’...
-
Page 20: General Safety Instructions
User's Manual K&F VIDA M VIDA M 19.08.2019 08/19/2019 General Safety Instructions Risk of electric shock WARNUNG • The system must be connected to the mains by a qualified electrician only. • Make sure that the power outlet has a ground connector and it is connected to the device through the PE conductor of the power cord! •... -
Page 21: Initial Installation Of Vida M 220 / 220 S Modules
User's Manual K&F VIDA M Initial installation of VIDA M 220 / 220 S modules VIDA M 220 / 220 S systems are disassembled for shipping and therefore need to be assembled for initial installation. Risks imposed by falling parts WARNUNG Never try removing the individual modules of VIDA M 220 / 220 S speakers once these have been joined, screwed, and glued together during initial installation. - Page 22 User's Manual K&F VIDA M VIDA M 19.08.2019 08/19/2019 VIDA M 220 11. Plug in the connector as shown. The connecting-cable label matches the terminal label. MT 1 The remaining terminals will stay unoccupied. Tipp TIPP Use a pair of bent needle-nose pliers to complete the following steps: VIDA M 220 S 12.
- Page 23 User's Manual K&F VIDA M 13. Place the sealing plate. 14. Tighten the M4x10 screws using an IH2.5 hexagon socket wrench. © KLING & FREITAG GMBH Version 1.1 Page 23 of 40...
-
Page 24: Wiring
User's Manual K&F VIDA M VIDA M 19.08.2019 08/19/2019 Wiring Wire the speaker as described below. Terminal positions and purpose Netzanschluss, 100 V bis 240 V Fuse (250 V, 8 A, slow blow) Sealing power-cable gland and strain relief Dante/remote secondary (RJ45) Dante/remote primary (RJ45) Audio terminals inputs: analog, AES 3, output... -
Page 25: Audio Terminals
User's Manual K&F VIDA M 5.2.2 Audio terminals Potentially missing contact HINWEIS Strip the cables by 7 mm. Aux out (analog): GND (ground) COLD (–) HOT (+) AES/EBU in (digital): GND (ground) COLD (–) HOT (+) Analog in: GND (ground) COLD (–) HOT (+) Cable specification Conductor type... -
Page 26: Gpio
User's Manual K&F VIDA M VIDA M 19.08.2019 08/19/2019 5.2.3 GPIO Potentially missing contact HINWEIS Strip the cables by 7 mm. GPO 1: NC1, M1, NO1: Status output (warnings, errors) GPO 2: NC2, M2, NO2: Status output (warnings, errors) ALARM: COM, MUTE, PRIO: GPIs, for example, for warning sys- tems: auto switch-off for prioritizing another warning system, or for load-... -
Page 27: Gpio Specifications
User's Manual K&F VIDA M GPIO specifications GPI A1 – A3: Type Floating optocoupler inputs Power consumption 2.5 mA @10 V 12 V/1 mA, floating Internal voltage supply Reverse voltage –6 V HIGH switching threshold Edge-triggered: 5 V (min.) – 30 V (max.) LOW switching threshold Edge-triggered: –6 V (min.) –... -
Page 28: Gpi Internal Wiring
User's Manual K&F VIDA M VIDA M 19.08.2019 08/19/2019 6.1.1 GPI internal wiring: OPT3 OPT2 OPT1 GPI A1 GPI A3 GPI A2 10 V Page 28 of 40 Version 1.1 © KLING & FREITAG GMBH... -
Page 29: Gpo
User's Manual K&F VIDA M Type Floating MOFSET switches Max. Continuous current 0.5 A Max. Peak current 1.5 A Max. Peak voltage 60 VAC NO1 / NO2 Normally open, low impedance to COMMON NC1 / NC2 Normally closed, high impedance to COMMON M1 / M2 COMMON GPO internal wiring:... -
Page 30: Systemlatency
User's Manual K&F VIDA M VIDA M 19.08.2019 08/19/2019 Systemlatency The following table lists the systems latency that is to be expected of the VIDA M. These values are true for the firmware version 1.1.0 and without using beamsteering. Input K&F VIDA M AUX OUT Analog 6.016 ms... -
Page 31: Changing Between Dante Redundancy Operating Modes
User's Manual K&F VIDA M 7.1.2 Changing between Dante redundancy operating modes 1. Launch Dante Controller. 2. Double-click the VIDA M to be configured to access the Device View. 3. Click the Network Config tab. 4. Make the appropriate settings in the Dante Redundancy section. 7.1.3 Setting up Dante latency with an additional hop There is one additional network switch installed inside K&F VIDA M which translates to one... -
Page 32: Initial Operation
User's Manual K&F VIDA M VIDA M 19.08.2019 08/19/2019 Initial Operation 1. Download the VIDA App from the Microsoft Store and install it. For this purpose, visit the Microsoft App Store and search for VIDA App. 2. Download the VIDA App User’s Guide from our website (www.kling-freitag.de). 3. - Page 33 User's Manual K&F VIDA M To check, change to the Setup tab. • When the progress bar is fully displayed and no red dot is shown, the speaker is ready for operation. 8. For details on speaker configuration and operation, refer to the VIDA App User's Manual. 9.
-
Page 34: Updates
User's Manual K&F VIDA M VIDA M 19.08.2019 08/19/2019 Updates Firmware Update 1. Connect the speakers to the mains. 2. Add the speakers to your network. 3. Download the VIDA Firmware Updater from our website (www.kling-freitag.de). 4. Unzip the file and run the executable. 5. -
Page 35: Dante Update
User's Manual K&F VIDA M Dante Update 1. Connect the speakers to the mains. 2. Add the speakers to your network. 3. If the Dante Controller application is already installed, proceed to step 10. 4. Visit https://www.audinate.com/products/software/dante-controller. 5. Select your operating system. 6. -
Page 36: Care And Maintenance
User's Manual K&F VIDA M VIDA M 19.08.2019 08/19/2019 When the update is complete, the following dialog will be shown: 17. Check the REBOOT REQUIRED box. Click the REBOOT SELECTED DEVICES button to reboot the updated speaker(s). Care and Maintenance The K&F VIDA M system can exhibit signs of wear over the years, for example, from mechan- ical strain, transport damage, corrosion, or improper handling. -
Page 37: Transportation And Storage
User's Manual K&F VIDA M Transportation and Storage Store the product in a dry place. Also, transport under dry conditions only. During prolonged storage, ensure sufficient ventilation. Avoid vibrations during transport. Avoid mechanical stress during transport and storage, so the product is not damaged. Disposal This symbol on the electronic equipment indicates that the product must not be dis- posed of with household waste. -
Page 38: Ec Declaration Of Conformity
User's Manual K&F VIDA M VIDA M 19.08.2019 08/19/2019 EC Declaration of Conformity Page 38 of 40 Version 1.1 © KLING & FREITAG GMBH... - Page 39 User's Manual K&F VIDA M © KLING & FREITAG GMBH Version 1.1 Page 39 of 40...
- Page 40 THANK CHOOSING K&F. KLING & FREITAG GmbH Junkersstrasse 14 · D-30179 Hannover Phone +49 (0)511 969970 www.kling-freitag.de · info@kling-freitag.de...
Need help?
Do you have a question about the VIDA M Series and is the answer not in the manual?
Questions and answers