Advertisement
Switch action
To prevent the trigger from being acciden-
tally pulled, a lock-off button is provided.
To start the tool, push in the lock-off
button and pull the trigger. Release the
trigger to stop.
Loc
k - o f f b u t t o n
\
CAUTION
:
0
Before connecting the battery to the tool, always check to
see
that the switch trigger
Do not switch on the tool when someone is nearby or when the blades are contacting
actuates properly and returns to the "OFF" position when released.
something.
Connecting the battery to the tool
Connect the battery to the tool using the adaptor cord. To prevent the adaptor cord from
being accidentally disconnected, hook the cord to both strain relief hooks on the tool and
the battery.
-Strain
relief h o o k
Carrying the battery
Hook the battery to your waist belt. If the
adaptor cord
i s
too long for your work, use
the band provided to hold
it
when you coil
it
shorter.
/
Strain relief h o o k
8
Advertisement
