Advertisement
MAINTENANCE
CAUTION
:
Always be sure that the tool is switched off and the battery is disconnected from the tool
before attempting to perform inspection or maintenance.
Blade maintenance
After operation, clean off the blades (both sides) with a stiff brush. Then wipe the blades
with a cloth and coat them with light machine oil.
Brush
\
Machine oil
//'
CAUTION :
Dirt and corrosion cause excessive blade friction and shorten the operating time per
battery charge.
If the blades become dull or slightly
damaged by contact with foreign matter,
they can usually be restored to their
original performance by sharpening with a
file.
Removing or installing the blades
Seriously damaged blades or blades that
have been sharpened numerous times
should be replaced. First, disconnect the
battery from the tool. Loosen the four
screws, then remove the blades.
ile
10
Advertisement
