Preparation; Carrying Out The Descaling Process - Miele H6461B Operating And Installation Instructions

Preparation

We recommend using the descaling
tablets supplied. They have been
specially developed for Miele for
optimum cleaning results.
Other descaling agents, which
contain other acids besides citric
acid and/or other undesirable
substances, such as chlorides for
example, could cause damage.
Moreover, the descaling effect
required could not be guaranteed if
the descaling solution was not of the
appropriate concentration.
Miele descaling tablets are available to
order from Miele or via the internet at
www.miele-shop.com.
You will need a container of approx.
1 litre capacity.
A plastic tube (with suction cup) is
supplied with your oven so that you
do not have to hold the container with
the descaling agent underneath the
water intake pipe.
^ Place the end of the plastic tube in
the bottom of the container and
secure the tube with the suction cup.
Cleaning and care
Follow the instructions for the mixing
ratio carefully. Otherwise the oven
will be damaged.
^ Fill the container with approx. 600 ml
cold tap water and completely
dissolve 1 descaling tablet in it.

Carrying out the descaling process

A Select €.
B Scroll through the list until "Descale"
is highlighted.
C Touch the OK sensor.
If the Moisture plus d function and
the Automatic programmes that use
moisture are already locked, the
descaling process can be started
immediately by touching the "OK"
sensor.
A message with advice about the
activation phase will appear in the
display.
D Place the universal tray on the top
shelf level to collect the descaling
solution after it has been used.
E Confirm the message shown with the
OK button.
109