Table of Contents
Advertisement
DIR-320NRU Multifunction Wireless Router Supporting
WiMAX, 3G GSM/CDMA with Built-in Switch
User Manual
Telnet
On the System / Telnet page, you can enable or disable access to the device settings via TELNET
from your LAN. By default, access is disabled.
To enable access via TELNET, select the On checkbox. In the Port field, enter the number of the
router's port through which access will be allowed (by default, the port 23 is specified). Then click
the Change button.
To disable access via TELNET, deselect the On checkbox and click the Change button.
Figure 126. The System / Telnet page.
Page 151 of 156
Configuring via Web-based Interface
Advertisement
Table of Contents
