Table of Contents
Advertisement
DIR-320NRU Multifunction Wireless Router Supporting
WiMAX, 3G GSM/CDMA with Built-in Switch
User Manual
Also you can set the address of a device connected to the router's LAN at the moment. To do this,
select the relevant value from the drop-down list located to the right of the field (the field will be
filled in automatically).
In the Username field, enter your login, and in the Password and Password confirmation
fields – the password provided by your ISP.
If authorization is not required, select the Without authorization checkbox.
If needed, specify additional settings for your PPPoE WAN connection.
Parameter
Service name
Authentication
algorithm
MTU
Figure 28. Configuring PPPoE WAN connection.
The name of the PPPoE authentication server.
Select a required authentication method from the drop-down list or
leave the AUTO value.
The maximum size of units transmitted by the interface.
Page 39 of 156
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
