Table of Contents
Advertisement
DIR-320NRU Multifunction Wireless Router Supporting
WiMAX, 3G GSM/CDMA with Built-in Switch
User Manual
You can specify the following parameters:
Parameter
Template
Name
Interface
Protocol
Public port (begin)/
Public port (end)
Private port (begin)/
Private port (end)
Private IP
Remote IP
Click the Change button.
To edit the parameters of an existing server, follow the link with the name of the server. On the
opened page, change the needed parameters and click the Change button.
To remove an existing server, follow the link with the name of the server. On the opened page, click
the Delete button.
Select a virtual server template from the drop-down list, or select
Custom to specify all parameters of the new virtual server
manually.
A name for the virtual server for easier identification. You can
specify any name.
A WAN connection to which this virtual server will be assigned.
A protocol that will be used by the new virtual server. Select a value
from the drop-down list.
A port of the router from which traffic is directed to the IP address
specified in the Private IP field. Specify the start and the end value
for the port range. If you need to specify one port, enter the needed
value in the Public port (begin) field and leave the Public port
(end) field blank.
A port of the IP address specified in the Private IP field to which
traffic is directed from the Public port. Specify the start and the
end value for the port range. If you need to specify one port, enter
the needed value in the Private port (begin) field and leave the
Private port (end) field blank.
The IP address of the server from the local area network. To choose a
device connected to the router's LAN at the moment, select the
relevant value from the drop-down list located to the right of the
Private IP field (the field will be filled in automatically).
The IP address of the server from the external network.
Page 134 of 156
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
