Advertisement
DMX Address Setting
Press the MENU button to select
display will blink. Use the DOWN and UP buttons to choose the address to
confirm. To go back to the functions without any changes press the MENU
button again. Press and hold the MENU button for one second or wait for
one minute to go back to the main menu.
Channel Mode
Press the MENU button to select
display will blink. Use the DOWN and UP buttons to select the
Channel) or
(6 Channel) or
Channel) or
(27Channel)mode.Once the mode has been selected,
press the ENTER button to confirm. To go back to the functions without
any changes press the MENU button again. Press and hold the MENU
button for one second or wait for one minute to go back to the main menu.
Master Mode or
Press the MENU button to select
display will blink. Use the DOWN and UP buttons to select the
(Slave 1),
(Slave 2) or
been selected, press the ENTER button to confirm. To go back to the
functions without any changes press the MENU button again. Press and
hold the MENU button for one second or wait for one minute to go back to
the main menu.
. Press the ENTER button and the
. Press the ENTER button and the
(12 Channel) or
Slave Mode
. Press the ENTER button and the
(Master) mode. Once the mode has
Show Mode
Press the MENU button to select
display will blink. Use the DOWN and UP buttons to select the
(show 1) or
Once the mode has been selected, press the ENTER button to confirm. To
go back to the functions without any changes press the MENU button
again. Press and hold the MENU button for one second or wait for one
minute to go back to the main menu.
Sound Mode
(1
Press the MENU button to select
(14
display will blink. Use the DOWN and UP buttons to select the
(sound on) or
press the ENTER button to confirm. To go back to the functions without
any changes press the MENU button again. Press and hold the MENU
button for one second or wait for one minute to go back to the main menu.
Sound Sensitivity
Press the MENU and use the UP and DOWN buttons to select
select the sound sensitivity between value 0 and 100. Press the ENTER
button for confirmation after value selection. To go back to the functions
without any changes press the MENU button again.
Led Display
Press the MENU button to select
display will blink. Use the DOWN and UP buttons to select the
. Press the ENTER button and the
(show 2) or
(show 3) or
. Press the ENTER button and the
(sound off) mode. Once the mode has been selected,
. Press the ENTER button and the
(show 4) mode.
and
Advertisement
