Advertisement
Other Controls
Stainless
Steel
Refrigerator
How
TurboCool
TM
works
TurboCool
rapidly cools
TURBO •
the refrigerator
compartment
in
order to more quickly
cool foods.
Use TurboCool
when adding
a large amount of food to the refrigerator
compartment,
putting
away foods after they
have been sitting out at room temperature
or when putting away warm leftovers.
It can
also be used if the refrigerator
has been
without
power for an extended
period.
Once activated,
the compressor
will turn on
immediately
and the fans will cycle on and
off at high speed as needed for 8 hours.
The compressor
will continue
to run until
the refrigerator
comportment
cools to
approximately
34°F (1°C), then it will cycle
on and off to maintain
this setting. After
8 hours, or if TURBOCOOL is pressed again,
the refrigerator
compartment
will return
to the original setting.
How to use
TurboCool
1 Press TURBOCOOL
The refrigerator
temperature
display will show TC.
2 After TurboCool
is complete,
the refrigerator
compartment
will return to the original setting.
NOTES:
• The refrigerator temperature cannot
be changed during TurboCool.
• The freezer temperature is not affected during
TurboCool.
• When opening the refrigerator door during
TurboCool, the fans will continue to run if
they have cycled on.
Energy Saver
This product
is equipped
with
on Energy Saver feature.
The refrigerator
is shipped
with the Energy Saver feature ON.
Over time, moisture con form on the front
surface of the refrigerator cabinet and cause
rust. If moisture does appear on the front surface
of the refrigerator cabinet, turn off the Energy
Saver feature by pressing and releasing
the ENERGYSAVERpod on the control panel.
Door Alarm
The door alarm will sound
if either door is open for more than
2 minutes. The beeping
sound will
stop when you close the door.
Advertisement
