Advertisement
Shelves and Bins
Stainless
Steel Refrigerator
Basket removal
(bottom
drawer)
(cont.)
To Remove
the Deep Full-Width
Lower
Basket:
1 Open the bottom freezer drawer until
it stops.
2 Lift the rear of the basket up so the two rear
alignment tabs are pulled out of the slide
bracket.
3 Rotate the basket up and out of the drawer.
When
Replacing
the Deep Full-Width
Lower
Basket:
Lower the front end of the basket into position so
that the two front alignment tabs enter the slide
bracket. Then lower the rear of the basket into
place, ensuring the two rear alignment tabs
are pressed into place in the slide bracket.
NOTE: Always be sure that all 4 basket slots are
engaged in the slide brackets before sliding back
into the freezer.
Appearance may vary
Adjustable
bins on
the door
Adjustable bins can easily be carried from
refrigerator to work area.
To remove: Lift bin straight up, then pull out.
To reploce or relocote: Slide in the bin just above
the molded door supports, and push down.
The bin will lock in place.
The snugger helps prevent tipping, spilling
or sliding of small items stored on the door shelf.
Grip the finger hold near the rear of the snugger
and move it to fit your needs.
Non-
Adjustable
bins on
the door
To remove: Lift the bin straight up, then
pull out.
To replace: Engage the bin in the molded
supports on the door and push down. It will lock
in place.
Non-
Adjustable
beverage
rack
To remove: Lift the rack straight up, then pull out.
To replace: Engage the rack in the molded
supports on the door and push down. It will lock
in place.
14
Advertisement
