Advertisement
Operating
Instructions
Stainless
Steel Refrigerator
Temperature
controls
®
®
FREEZER
REFRIGERATOR
The temperature
controls are preset in the factory at 37°F
for the fresh food compartment
and O°F for the freezer
compartment.
Allow 24 hours for the temperature
to stabilize
to the preset recommended
settings.
The temperature
controls can display both the SET temperature
as well as the actual temperature
in the fresh food and freezer
compartments.
The actual temperature
may vary slightly
from the SET temperature
based on usage and operating
environment.
Setting either or both controls to OFF stops cooling in both
the freezer and fresh food compartments
but does not shut
off electrical power to the refrigerator.
NOTE: The refrigerator
is shipped with protective
film covering
the temperature
controls. #this film was not removed during
installation,
remove it now.
To change the temperature, press and release
the £°,)(warmer) or £_,)(colder) pad. The SET light
will come on and the display will showthe set
temperature_ To change thetemperature,
tap
either the £o.)(warmer) or (,:_,)(colder)pad until
the desired temperature is displayed. Fresh food
temperatures can be adjusted between 34°F
and 44°F and the freezer temperatures can be
adjusted between -6°F and +6°E
Once the desired temperature has been
set, the temperature display will return to
the actual fresh food and freezer temperatures
after 5 seconds. Several adjustments may
be required. Each time you adjust controls,
allow 24 hours for the refrigerator to reach
the temperature you have set.
To turn the cooling system off, tap
the @(warmer)
pad for either the fresh food
compartment or the freezer until the display
shows OFF.To turn the unit back on, press
the @(colder)
pad for either the fresh food
compartment or freezer. The SET light will
illuminate on the side you selected. Then press
the @(colder)
pad again (on the side where
the SET light is illuminated) and it will go to
the preset points of O°Ffor the freezer and 37°F
for the fresh food compartment.
Performance
Air Flow
System
The Performance Air-Flow Sgstem is designed to
maximize temperature control in the fresh food
and freezer compartments, This unique special
feature consists of the Air Tower along the top
and back walls of the fresh food compartment
and the Air Tunnel on the bottom portion of
the freezer rear wall. Placing food in front of
the louvers on these components will not affect
performance.
Although the Air Tower and the Air Tunnel
can be removed, doing so will affect temperature
performance. (For removal instructions, on-line,
24 hours a day, contact us at GEAppliances.com
or call 800.444.1845. In Canada, call us at
1.800.561.3344.)
Advertisement
