Cycle Guide - Maytag YMED8100DC0 Use & Care Manual

CYCLE GUIDE - TIMED CYCLES
Settings and options shown in bold are default settings for that cycle.
if settings are changed, the new settings will be remembered (except on Rapid Dry). if there is a power failure, settings will return to the
default.
Not all features and cycles are available on all models.
Not all settings and options are available on each cycle.
Adjusting drying time on Timed Cycles
When you select a Timed
Cycle, the time appears in
the display. Use + and - to
increase or decrease the time
in 1-minute increments. Touch
and hold to change the time
in 5-minute increments.
The maximum dry time is 100 minutes.
Selecting the Drying Temperature
A High heat setting may be used for drying heavyweight items such
as towels and work clothes.
A Low to Medium heat setting may be used for drying
medium-weight items such as sheets, blouses, dresses,
underwear, permanent press fabrics, and some knits.
Use a no heat (air only) setting for foam, rubber, plastic,
or heat-sensitive fabrics.
Line dry bonded or laminated fabrics.
NOTE: if you have questions about drying temperatures for various
loads, refer to the care label directions.
= Drying
items to dry:
Any load
NOTE: Select Air
Only to dry foam,
rubber, plastic, or
heat-sensitive
fabrics.
Small loads and
sportswear
Small loads and
sportswear
Cycle:
Timed Dry
Rapid Dry
Air Dry
Temperature:
High
Medium
Low
Extra Low
Air Only
High
Medium
Low
Extra Low
Air Only
Default
Time:
40
26
50
Available
Options:
Wrinkle Prevent t
Wrinkle Prevent t
Wrinkle Prevent t
ii_ /i_ii_ i_ i_ i_ i _ i_i/ _i_ii i _iii i_ ii _iiii!_!_!_/iii_ i_ i_
Cycle Details:
i_ se to dry items to a damp level for items that do not require an entire drying cycle. Select a drying
temperature based on the type of fabrics in your
load. If you are unsure of the temperature to select
for a load, select the lower setting rather than the
higher setting.
Q For small loads of 3-4 items.
For small loads of 3-4 items.
On steam models, you may select the "With Steam" setting to add a short steam cycle after 60 minutes. This is available only with High and Medium Drying
Temperature settings.
CYCLE GUIDE - STEAMCYCLE (on some models)
Settings and options shown in bold are default settings for that cycle.
Not all settings and options are available on each cycle.
Steam cycles are designed for use with dry loads to loosen wrinkles, reduce odors, and refresh fabrics.
Default _ble 1
Shirts, b,ouses, I I Static ! dryer t °°'°ng'D°n°tadddryer s heets'
and slacks I Refresh I Medium I 22 ' wrinkle preven[* I _'_ Use t° reduce 'ight wrinkles fr°m '°ads left in the I
On steam models, you may select the "With Steam" setting to add a short steam cycle after 60 minutes. This is available only with High and Medium Drying
Temperature settings.
* On steam models only.
Load Size Recommendations
For best results, follow the load size recommendations noted
for each cycle.
Q mall load: Fill the dryer drum with 3-4 items, not more than
1/4 full.
_ Medium load: Fill the dryer drum up to about 1/2 full.
Large load: Fill the dryer drum up to about 3/4 full.
Do not overload, items need to tumble freely.