Installation Requirements; Tools And Parts - Maytag MGT3800XW3 Installation Instructions Manual

INSTALLATION REQUIREMENTS
TOOLS AND PARTS
Gather required tools and parts before starting installation.
Tools needed:
4
Flat-blade screwdriver
Adjustable or open-end
wrench 9/16" (14 mm)
4" rain
(102 rnrn)_
Wood block
Pliers that open to 1%6"
(39.5 mm)
#2 Phillips screwdriver
Level
@
Ruler or measuring tape
Adjustable wrench that
opens to 1" (25 mm) or
hex-head socket wrench
1/4" nut driver Wire stripper
(recommended)
Caulking gun and compound
(new vent installations)
Utility knife
Tin snips (new vent
installations)
Tools needed for gas installations:
8" or 10" pipe wrench
Pipe-joint compound
resistant to LP gas
Optional tools:
8" or 10" adjustable wrench
(for gas connections)
Bucket
Flashlight
Parts supplied:
NOTE: Remove parts package from the washer basket.
Check that all parts were included.
Front leveling feet with nuts (2)
9
Drain hose
Shipping strap (Not in parts bag.
See "Remove Shipping Strap.")
Silver double-wire hose clamp