Table of Contents
Advertisement
7. Click the "Save/Reboot" button, save your configurations.
NOTICE:
If you select Dial-UP link, after configuring your ADSL modem, please install
the third-party dial up program to access Internet (For example: Ethernet
300/Ethernet 500/WinPoet). If your system is WinXP, you can use its own
Internet access program without any other additional programs.
PPP over Ethernet (RFC2516) setting
PPPoE is also named as RFC 2516. It is a method of encapsulating PPP packets
over Ethernet. PPP or Point-to-Point protocol is a method of establishing a
network connection/session between network hosts. It usually provides a
mechanism of authenticating users.
To configure the MODEM for PPPoE:
1.
From the Home page, click on "Quick Setup ", see the following:
10
Advertisement
Table of Contents
