I_ PUT THE REFRIGERATOR IN PLACE
Move the refrigerator
to its final location.
r_ LEVEL THE REFRIGERATOR
can be leveled by adjusting
rollers located near the bottom
Rollers have three purposes:
• Rollers adjust so the door closes easily when
opened about halfway. (Raise the front about
5/8" [16 mm] from the floor.)
,, Rollers adjust so the refrigerator
on the floor and does not wobble.
• Rollers allow you to move the refrigerator
away from the wall for cleaning.
To adjust the rollers on 23' (33" wide), 25', 26',
27' and 29' models:
• Turn the roller
to lower it. Use a
3/8" hex socket
or wrench, or an
Roller adjusting screw
r_ LEVEL THE REFRIGERATOR (cont.)
To adjust the
Turn the front roller
Roller adjusting screws
lower it. Use a 3/8" hex
wrench with extension, or an adjustable wrench.
These models also have rear adJustable
rollers so you can align the refrigerator
your kitchen cabinets. Use a ]/8" hex wrench
with extension to turn the screws for the rear
to raise the refrigerator,
to lower it.
LEVEL THE DOORS
Adjust the refrigerator
door to make the doors
even at the top.
Using a 7/16" wrench, turn the door adjusting
screw to the right to raise the door, to the left
to lower it.
A nylon plug, imbedded
in the threads of the
pin, prevents the pin from turning
wrench is used.
After one or two turns of the wrench, open
and close the refrigerator
door and check the
alignment at the top of the doors.
Doors should be even at top