GE GSHS6KGZCCSS Owner's Manual And Installation page 18

I stall
ti
I structi
ns
efrigerator
Models 22 23 25 26 27 & 29
Questions? Call 800.GE.CARES (800.432.2737) or Visit our Website at: GEAppliances.com
In Canada, call 1.800.561.3344 or Visit our Website at: www.geappliances.ca
BEFORE YOU BEGIN
Read these instructions completely and carefully.
•
IMPORTANT
- Save these instructions for
local inspector's use.
• IMPORTANT - Observe all
governing
codes and ordinances.
• Note to Installer- Be sure to leave these
instructions with the Consumer.
• Note to Consumer - Keep these instructions for
future reference.
Skill level - Installation of this appliance requires
basic mechanical skills.
Completion time - Refrigerator Installation
30 minutes
Water Line Installation
30 minutes
Proper installation is the responsibility of the
installer.
Product failure due to improper installation is not
covered under the Warranty.
If the refrigerator has already been installed, remove
the base grille (see Step 2 in Moving the Refrigerator),
then skip to Step 5 in Installing the Refrigerator.
PREPARATION
WATER SUPPLY TO THE ICEMAKER
If the refrigerator has an icemaker, it will have to be
connected to a cold water line. A GE water supply
kit (containing tubing, shutoff valve, fittings and
instructions) is available at extra cost from your
dealer, by visiting our Website at GEApplionces.
corn (in Canada at www.geappliances.ca) or from
Parts and Accessories, 800.626.2002 (in Canada
1.800.661.1616).
TOOLS YOU WILL NEED
3/8" and 5/16" Socket
1/2" and 7/16" Wrench
U
Plastic Putty Knife
Phillips Head Screwdriver
18