Advertisement
Available languages
Available languages
Operatin
instructions
Status
window
That STATUS window displays codes typically seen
during normal operation or programming of the
dishwasher. The STATUS window indicates the
following activity:
1h-24h
Indicates number of
delay start hours for
selected cycle.
CL
Flashes once the
program has been
entered and the
START pad is pressed.
It also flashes if the
door is opened during
a wash cycle. Close
the door to begin or
continue the wash cycle,
hoe
Child Lock is activated.
Minutes
L1 - L4
The cycle duration or
the remaining time.
Level of Rinse Aid
Dosage.
Blue
light
indicator
When the BLUE LIGHT illuminates on the floor this
indicates that the wash cycle is complete.
Error
indications
In the unlikely event the dishwasher malfunctions,
the STATUS window may display one of the
following codes: 'I10" - refer to dishwasher won't
run or fill and try to solve the problem "i20" - refer
to dishwasher does not drain properly and try to
solve the problem.
If, after the check, the problem
remains, or if the status window shows other error
codes, contact the Electrolux Customer Care
Center at 1-877-435-3287.
They will be able to
provide assistance in troubleshooting
the problem
and/or locating an authorized service technician, if
needed.
Advertisement
