Advertisement
Available languages
Available languages
Operatin
instructions
Child Lock Controls/Air
Dry
_._
I=i
To prevent children from accidently changing the
dishwasher cycle or starting the dishwasher, lock
the dishwasher controls by pressing the AIR DRY
pad until "Loc" LED is on. The controls are locked
and no new selections can be made until the lock
is released. To unlock the controls, press the AIR
DRY pad until "Loc" LED turns off.. If child lock is
activated the dishwasher will not work.
111
Max Dry
MAX DRY is available on Auto, Heavy, and Normal,
cycles The cycle time will increase when MAX
DRY option is selected.
Operation
Selection
Delay
J_
The Delay Start option allows you to automatically
delay starting your dishwasher from 2-4-6 hours.
Press DELAY pad until the LED of the desired
DELAY start is reached. If the door is opened while
the DELAY time is counting down, the DELAY LED
will blinks.
To cancel the DELAY option and begin the cycle
before the delay period is over, press the CANCEL
pad and then the START pad.
Error
indications
In the unlikely event the dishwasher malfunctions,
the 3 Delay LEDs blink constantly.
If the Hi-
Temp LED blinks intermittently 1 time refer to
"Dishwasher won't run or fill" and try to solve the
problem. If the Hi-Temp LED blinks 2 times refer
to "Dishwasher does not drain properly" and try to
solve the problem. If, after the check, the problem
remains, or if the LEDs are still blinking, contact
the Electrolux
Customer
Care Center at 1=877-
435=3287. They will be able to provide assistance
in troubleshooting
the problem and/or locating an
authorized service technician, if needed.
Blue
light
indicator
When the BLUE LIGHT illuminates on the floor this
indicates that the wash cycle is complete.
Start
[_
To start a cycle, press the START pad once and
close the door.
Cancel
@
To cancel a cycle at anytime, open the door and
press the START/CANCEL pad until the 1 min drain
feature is initiated. Close the door and the drain
cycle will begin. You will hear a tone for the start
and completion of the drain cycle. When the door
is opened, the last cycle selected will be displayed.
If desired, a new cycle can now be selected by
pressing START/CANCEL pad and upon closing
the door the cycle wil! begin.
Advertisement
