Uniden G24 Series Owner's Manual page 32

SECURITY CODE
Set up your security code to limit who can have access to the system from a remote location.
1. Tap Security Code icon to display the
Security Code screen.
2. If you have not entered a security code,
you can enter it here. If you have previously
entered a security code, your current
security code displays.
The default security code is set to 123456.
We recommend that you change this code
to something you will remember. You will
need the code to access your video from
a remote device such as a smart phone or
PC.
3. Tap on the Change Code field. A
keyboard screen displays.
4. Enter your security code. You can
switch the keyboard from alphabetical
characters to numbers/symbols and
back by tapping the field to the left of
the space bar. Tap Return. The Security
Code screen displays again.
You must enter a security code to moni-
tor your video from a PC or other device.
5. Tap OK on the system reboot prompt. The Network Setup screen displays.
6. Turn your G Series monitor off then back on for the security code change to take effect.
32