Connecting To The Intranet (Home Network) - Uniden G24 Series Owner's Manual

1. Connect one end of the Ethernet cable into the back of the cradle.
2. Connect the other end into your primary router (typically, the router from your service
provider).
3. Before placing the monitor into the cradle, make sure all video recordings are stopped,
otherwise, the system may lock up. Place cradle maximum distance away from your router.
4. Insert the monitor into the cradle. A screen asks if you want to connect to the internet or to
only charge the monitor.
5. Tap Connect. The Internet Connection Status Indicator appears on the upper left of the LIVE
screen indicating that the system is connected to the internet.
While the system is connected to the internet:
The LIVE screen display rate may reduce to 2-3 frames per second.
•
The touch screen's control operation will be limited. To return to full control of the touch
•
screen, disconnect from the internet. Tap on the Pop Up menu and select Charge Only.
6. When you connect remotely to the monitor, the Internet Connection Status Indicator shows
that remote view in progress.

Connecting to the Intranet (HOME NETwORK)

When the monitor is placed in the cradle and "charge only" is selected, you can still access your live
video from a PC or smart phone or tablet as long as those devices are also connected to the same
network as the monitor. For example your smart phone or tablet is connected to your home net-
work via WiFi. In this case, live video will still be displayed on the monitor as well as on the smart
phone or tablet.
43