User Maintenance; Cleaning The Projector; Cleaning The Projector Exterior; Cleaning The Lens - Ask Proxima M9 User Manual

Ask proxima home theater screen - front projector screen user manual

Hide thumbs Also See for M9:

Table of Contents

Periodically clean the projector exterior, lens, intake vents, and exhaust vents on a regular

basis.

Important!

Always make sure that the projector has cooled sufficiently before cleaning it. If the

projector is turned on, perform the following steps before cleaning it.

Turn off the projector.

Check to make sure that the POWER/STANDBY indicator has changed to amber.

Unplug the power cord from the power outlet, and allow the projector to cool

down for about 60 minutes.

Wipe the exterior of the projector with a soft cloth that has been moistened in a weak

solution of water and a mild neutral detergent. Be sure to wring all excess moisture from

the cloth before wiping.

Never use benzene, alcohol, thinner, or any other volatile agent for cleaning.

Carefully wipe the lens with a commercially available lens cloth or optical lens paper, like

those for eyeglasses or camera lenses. When cleaning the lens, be very careful to avoid

scratching it.

Dust and dirt tend to collect around the intake vents located on the back and both sides

of the projector. Because of this, you should use a vacuum cleaner to clean away

accumulated dust and dirt periodically as shown below.

User Maintenance

Table of Contents