Advertisement
Available languages
Available languages
Dishwasher
Installation
STEP 21: REPLACE TOEKICK
. Place toekick against the legs of the dishwasher.
Figure CC
Screws
. Align the toekick with the bottom edge and make sure it is
against the floor.
. Insert and tighten the 2 toekick attachment screws. The
toekick should stay in contact with the floor.
. When reinstalling the toe kick on models with a sound barrier,
ensure that the bottom edge is flush with the floor. Any
excess material should be tucked up behind the outer door.
Tip: Reduce sound from under the dishwasher.
Hake sure toekick is against floor.
STEP 22: CHECK THE FOLLOWING
. Tub trim does not interfere with the door
. Dishwasher is square and level at both the top and bottom of
the cabinet opening, with no twisting or distortion of the tub
or door
. All 4 legs of the dishwasher are firmly in contact with the floor
. Drain hose is not pinched between the dishwasher and
adjacent cabinets or walls
. Tub trim is fully seated on the tub flange
STEP 23: LITERATURE
. Be sure to leave complete literature package, these
Installation Instructions and product samples and/or coupons
with the consumer.
15
Advertisement
