GE GDT550HGD4WW Installation Instructions Manual page 10

Dishwasher Installation
STEP 13: LEVEL DISHWASHER
IM PORTANT
= Dishwasher must be level for proper
dish rack operation, wash performance and door operation.
The dishwasher must be leveled left to right and front to back.
This ensures the dish racks will not roll in or out on their own,
circulation water will flow to the pump inlet, and the door will
close without hitting the side of the tub.
, Remove the lower dish rack and place a level on the door and
lower rack track as shown in Figure R.
. Adjust the level of the dishwasher by individually turning the 4
legs on the bottom of the dishwasher as illustrated in Figure S.
Ensure all 4 legs are firmly in contact with the floor.
. The dishwasher is properly leveled when the level indicator is
centered left to right and front to back. Also, the dishwasher
door should close without hitting the side of the tub.
. Replace the lower rack.
Tip: Prevent unnecessary service charges. Verify dishwasher
is leveled.
Pull the dish racks half way out. They should stay put. Open
and close the door. The door should fit in the tub opening
without hitting the side of the tub. If the racks roll on their own,
or the door hits the side of tub, relevel the dishwasher.
Figure
R
Check
Front
to Back
Check
Level
Side
to Side
Figure S
Turn Legs
to Adjust //
J
lo