Advertisement
How to Initially Charge the battery:
1. Connect the red positive (+) cable to the red positive (+)
pole of the battery.
(see figure 5)
2. Connect the black negative (-) cable to the black negative
(-) pole of the battery. (see figure 6)
Note: The red positive (+) cable has a larger diameter than
the black negative y cable.
3. Charging rate: Charge battery @ 0.7 Amps for
5 ~ 10 hours.
•
After charging is complete, press down firmly with
both hands to seat the caps. (Do not pound or
hammer.) The battery is now sealed. (see figure 7 )
•
Once battery is firmly seated in battery compartment
attach the red positive wire to the red positive terminal
on the battery.
•
Then attach the black negative wire to the black
negative terminal on the battery.
Battery
Black (-)
WARNING
NEVER REMOVE THE STRIP OF CAPS NOR ADD ANY
WATER OR ELECTROLYTE.
Figure 5
Figure 6
Figure 7
Red (+)
Advertisement
