Advertisement
Preparing the battery:
·
Place battery on level surface. Remove sealing tape
from top. (see figure 1)
·
Take the electrolyte container out of the plastic bag.
·
Place electrolyte container upside down with the sealed
silver mouths of the electrolyte bottles in line with the
six filler holes of the battery. (see figure 2)
·
Push the container down strongly enough to break the
silver seals. (see figure 3)
·
As electrolyte starts flowing into battery, air bubbles
will come up from the mouths of the plastic electrolyte
bottles.
·
Leave bottles upside down in battery holes until
electrolyte is completely drained.
·
Never leave children unattended around battery.
·
If air bubbles cease to float to the top of the electrolyte
bottles, tap lightly on top.
·
DO NOT remove container from battery while it is
draining.
·
Never cut or pierce electrolyte container.
·
After all the electrolyte has drained from the bottles
into the battery, pull plastic electrolyte bottles gently
out of the battery.
·
Discard empty electrolyte bottles in a waste area that is
inaccessible to children and animals.
·
After filling let battery stand for at least 30 minutes
before charging. This allows the electrolyte to penetrate
plates for optimum performance and ensures longer
battery life.
·
After 30 minutes the battery is ready for its initial
charge. Place cap strip loosely over the filling holes as
shown in the picture. (see figure 4)
Battery
Figure 1
Figure 2
Figure 3
Figure 4
Advertisement
