Christie DWU951 User Manual page 12

RS-232C Communication
RS-232C Communication
When the projector connects to the computer by RS-232C communication, the
projector can be controlled with RS-232C commands from the computer.
For details of RS-232C commands, refer to RS-232C Communication / Network
command table (&19).
Connection
Turn off the projector and the computer.
1.
Connect the projector's CONTROL port and the computer's RS-232C port
2.
with a RS-232C cable (cross). Use the cable that fulfi lls the specifi cation
shown in fi gure.
Turn the computer on, and turn the projector on after the computer has started up.
3.
Set the COMMUNICATION TYPE to OFF in the COMMUNICATION menu of the
4.
OPTION - SERVICE menu.
1 2 3 4 5
6 7 8 9
DWU951/DWX951/DXG1051 User's Manual - Technical
RS-232C
RS-232C cable
RS-232C port
of the computer
① ②
6 7 8 9
⑥ ⑦ ⑧ ⑨
1 2 3 4 5
CD (1)
RD(2)
TD (3)
DTR (4)
GND (5)
DSR (6)
RTS (7)
DTS (8)
RI (9)
CONTROL
(cross)
CONTROL port
of the projector
③ ④ ⑤
⑨ ⑧
⑤ ④ ③
(1) －
(2) RD
(3) TD
(4) －
(5) GND
(6) －
(7) RTS
(8) CTS
(9) －
10
⑦ ⑥
② ①
020-000664-01 Rev. 1 (01-2014)