Installing The Memory; Removing The Coin-Cell Battery; Installing The Coin-Cell Battery; Removing The Heatsink Assembly - Dell Precision Tower 7810 Owner's Manual

Installing the Memory

1. Insert the memory module into the memory socket.
2. Press down on the memory module until the securing clips secure the memory in place.
NOTE: Tilting of DIMM during insertion can cause damage to the DIMM.
3. Install:
a. memory shroud
b. optical drive
c. computer cover
4. Follow the procedures in

Removing the Coin-Cell Battery

1. Follow the procedures in
2. Remove:
a. computer cover
b. PCIe cards (slot 2 – optional)
3. Press the release latch away from the battery to allow the battery to pop-up from the socket. Lift the
coin-cell battery out of the computer.

Installing the Coin-Cell Battery

1. Place the coin-cell battery into the slot on the system board.
2. Press the coin-cell battery downward until the release latch springs back into place and secures it.
3. Install:
a. PCIe cards(slot 2 – optional)
b. computer cover
4. Follow the procedures in

Removing the Heatsink Assembly

1. Follow the procedures in
2. Remove:
a. computer cover
b. optical drive (required only for the removal of heatsink assembly for CPU1)
3. Perform the following steps:
After Working Inside Your
Before Working Inside Your
After Working Inside Your
Before Working Inside Your
Computer.
Computer.
Computer.
Computer.
25