Related Manuals for Ofna Racing Hyper7
Summary of Contents for Ofna Racing Hyper7
- Page 1 1:8 SCALE GAS POWERED OFF-ROAD BUGGY INSTRUCTION MANUAL PLEASE READ INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING THIS MODEL. KEEP THIS MANUAL FOR PARTS NUMBERS WHEN ORDERING . SPECIFICATION ARE SUBJECT TO CHANGE WITHOUT NOTICE.
-
Page 2: Required For Operation
REQUIRED FOR OPERATION You will need to buy a few items to start the engine and run the car. THINGS NEEDED • Use 20% nitro CAR fuel. Do not use airplane fuels, they will over heat engine. • Buy long glow plugs, like OFNA/PICCO P-7 (#51007). Use plugs without idle bar. - Page 3 READ THIS BEFORE RUNNING Running a nitro kit is fun and easy, but to make this a safe • Clear oil and dirt from chassis with a degreaser. and good experience you must observe a few rules. This Precautions kit is extremely fast, easily over 40MPH, and can seriously •...
- Page 4 * Align throttle servo same CHECKING ENGINE THROTTLE as shown. Brake © 1. Insert AA batteries into 1. Pull Full Throttle. 1. Push trigger to full transmitter (8 Pcs). brake position. 2. Adjust alum. Stopper to 2.Turn on transmitter. increase or decrease 3.Turn on receiver.
Need help?
Do you have a question about the Hyper7 and is the answer not in the manual?
Questions and answers