To Turn Unit Off - Crosley CAHWE12ER410A12 Use & Care Manual

Operating Instructions
(continued)
TO CHANGE TEMPERATURE DISPLAY;
v
DO THIS;
PRESS AND HOLD THE
UP/DOWN BUTTONS
TOGETHER FOR 3 SECONDS
YOU WILL SEE:
A
v
Note: The control is capable of displaying temperature in degrees Fahrenheit or degrees Celsius.
TO TURN UNIT OFF: YOU WILL SEE:
temp/tim_r
A
V
sleep filter
reset
® o°_; _
DO THIS:
PRESS
ON/OFF BUTTON
A
II
v
sleep filter
reset
O ON-
timer OFF
Note: If the unit is turned off in heat mode (if applicable) or fan only mode, it will return to the same setting when it is turned on again.
When the unit is turned off in cool or energy saver mode, it will run in energy saver mode when it is turned on again, but the setting of
temperature and fan speed will remain. When unit is shut off in the Heat Mode, the fan will continue to run for a few seconds to
dissipate residual heat within the unit.
ADDITIONAL THINGS YOU SHOULD KNOW
Now that you have mastered the operating procedure, here are more features in your control that you should become familiar with.
• The "Cool" circuit has an automatic 3 minute time delayed start if the unit is turned off and on quickly.
This prevents overheating of the compressor and possible circuit breaker tripping. The fan will continue
to run during this time,
• There is a 2-Second delay for the compressor shutting down when selecting FAN ONLY/HEAT. This is to cover the possibility of
having to roll through to select another mode.
• The control will maintain the set temperature within 2 degrees Fahrenheit, between 60F and 90F degrees (in cool mode), 55F
and 80F degrees (in heat mode).
, After a power outage, the unit will memorize the last setting and return the unit to the same setting once power is restored.
(4-WAY)
4-Way Air Directional Louvers
The 4-Way air directional louvers allow you to direct the air flow Up or Down
and Left or Right throughout the room as needed, To adjust the air direc-
tional louvers side-to-side, use the center handle as you move it side-to-side,
9