Crosley CAWE12ERR410A10 Installation Instructions Manual

READ BEFORE INSTALLING UNIT
For Through-the-Wall Air Conditioners
, Carefully read the installation manual before beginning.
, Follow each step as shown.
Observe all local, state, and national electrical codes and by qualified, licensed, authorized personnel only.
Pay attention to danger and safety notices.
To avoid risk of personal injury, property damage, or product damage due to the weight of this device and sharp edges that may
be exposed:
Air conditioners covered in this manual pose an excessive weight hazard. Two or more people are needed to move and install
the unit. Wear protective gloves whenever lifting or carrying the unit. AVOID the sharp metal fins of front and rear coils. To
prevent injury or strain, use proper lifting and carrying techniques when moving unit.
Carefully inspect location where air conditioner will be installed. Be sure it will support the weight of the unit overan extended
period of time.
, Handle air conditioner with care.
Make sure air conditioner does not fall during installation.
Do This First (for existing sleeve)
Note that the air conditioner dimensions are: 24" wide,14" high, and 19" deep (without front). Install Air Conditioner
according to these installation instructions to achieve the best performance. Save these installation instructions for
futu re refe re n ce.
items in Kit
You may not need all parts in the kit. Discard unused parts.
No. Hardware Qty.
1 Tapered Spacer Blocks (17" Long) 2
2 Centering/Support Blocks ( 4 _" x 3_" x 11/2") 4
3 Plastic Divider ( _" x 4 _" x 14_" ) 2
4 Stuffer Seat (1" x 1 _ "x 84" ) 1
5 seal ( l"x l_"x 25" ) 3
6 seal ( l"x l_"x 14" ) 2
7 seal ( 1" x 3/8" x 25" ) 3
8 seal ( 1" x 3/8" x 14" ) 2
9 seal(1"x314"x14" ) 2
No.
10
11
12
13
14
15
16
17
18
Hardware
Trim Frame (side legs)
Trim Frame (top & bottom legs)
Ground Wire (green)
Toothed washer for grounding screw
Grounding Screw
Grille (plastic)
Grille Aluminum
Nuts (plastic)
Screw w/washer
Qty.
2
2
1
2
1
1
1
4
4
2020213A0734