Check Filter Feature - Crosley CAHWE12ER410A12 Use & Care Manual

Operating Instructions
(continued)
CHECK FILTER FEATURE: YOU WILL SEE:
temp_imer
m
A
sleep filter
resel
V
O ON-
timer OFF
I DO THIS: __
PRESS FILTER
RESET BUTTON
_em_mer
A
_leep filter
reset
Ofi-
timer OFF
Note: This feature is a reminder to clean the Air Filter (See Care and Cleaning) for more efficient operation. The LED (light) Will
illuminate after 250 hours of operation. To reset after cleaning the filter, press the "Filter Reset" button and the light will go off.
HEATING FEATURE(on some models):
[] ha u_° A
med
_peed _ _
V
mode__
/F
DO THIS:
PRESS
MODE BUTTON
SELECT HEAT
YOU WILL SEE:
ten,p/timer
_ed
_peed _
V
mode
timer
Note: This feature can be used with any combination of FAN Speeds (Low speed only on 1!5V models), Timer, or Sleep Modes. When in
the "Heat" mode,the fan will run continuously while heat is needed. The temperature will automatically be maintained anywhere between
55 °F(!3 °C) and 80 °F(27 °C). When the room set temperature is satisfied, the fan will cycle off and on to circulate and sample the room
air.
FAULT CODES:
[] ha u_°
A
n,ed
_peed _
V
mode
t_rae_
sleep filter
reset
ON-
OFF
med
_peed _
V
ra_de
t_ra_r
sleep filter
reset
ON-
OFF
ten,pit,met
a h_ u_ A
_ed
_peed _
V
mode
t_me_
sleep filter
reset
ON-
OFF
If the display reads "HS", a sensor has If the display reads "AS", a sensor has If the display reads "ES", a sensor has
failed, Contact your Authorized Service failed, Contact your Authorized Service failed. Contact your Authorized Service
Center. Center. Center.