Headlamp Bulbs Replacement - Husqvarna WR 250 2013 Owner's Manual

HEADLAMP BULBS REPLACEMENT
To gain access to the healamp bulbs, proceede as follows:
- remove the upper fastening screw of the the headlamp carrier to
the instrument panuel support (1);
- push forward the headlamp carrier (B) and pull it towards the
high (C) in order to uncouple from the two lower supports.
- remove the headlamp carrier;
1
EN - 42 SPECIFICATIONS - OPERATION - MAINTENANCE
- remove the two filaments bulb connector (2) and the boot
(3);
- release the bulb holder clips (4) and take out bulb (5);
To replace the parking light bulb (6) extract it from the inside
cover.
After replacement, reverse operations for reassembly.
3
4
C
B
6
2
5