Using The Remote Control; Power On, Power Off And Standby; Switching Inputs - BenQ DV2680 User Manual

Using the Remote Control

Power on, Power off and Standby

Switching Inputs

22
Using the Remote Control
Turning on the television
1. Plug the television's power cord into a wall outlet (after
this step, the main unit will turn on and enter standby
mode automatically). The power indicator will be red.
2. Press the (Power) button on the remote control.
The television will turn on. (The power indicator
changes to green.)
Turning off the television
Press the (Power) button on your remote control
again, and the television will go into standby mode. (The
power indicator will turn red.)
1.Turn on all connected equipment or computers.
2. Press the (Input) button on your remote control to
display the current selected input.
Press the input button repeatedly until your desired input
is displayed. The sequence is as follows:
TV - AV1 - AV1 RGB - AV2 - AV2-S (appears only when
the S-Video input signal is connected) - PC - Component
- DVI- ...