Further, BenQ Corporation reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation of BenQ Corporation to notify any person of such revision or changes.
Safety, Warning, and Notice To prevent potential dangers and prolong the service life of the TV, please observe the following points when installing, operating, and cleaning the TV. For wall mounting, have a Observe all warnings and qualified and experienced cautions as labeled on the TV.
TV. Transport the TV to your nearest BenQ authorized service center for repair. • There are no user serviceable parts in this TV. Never unscrew or remove any covers.
• LCD (Liquid Crystal Display) screens, like plasma (PDP) and conventional CRT (Cathode Ray Tube) screens, are also susceptible to “screen burn-in” or “image retention” which can be found on the screen as visible fixed lines and shades and cannot be removed. To avoid such permanent damage to the screen, please take the following preventive measures when using your TV: (1) Avoid displaying still images (like On-Screen Display menus, TV station logos, fixed/inactive text or icons) for more than two hours.
Notes for viewing 3D videos While watching 3D videos, be sure to wear the accompanying proprietary • 3D glasses and take a rest regularly (remember to remove the 3D glasses during rest) to avoid possible discomfort. While watching 3D videos, please keep a distance (at least 2 times the •...
Table of Contents Copyright ....................2 Disclaimer....................2 BenQ ecoFACTS ..................2 Safety, Warning, and Notice ..............3 Care and cleaning information ............4 Safety notice for batteries..............5 Safety notice for remote control............5 Notes for viewing 3D videos ..............6 Getting to know your TV ..............9 Front view.........................
Page 8
Supported component (YPbPr) video timing ........32 Supported HDMI video timing ................32 Supported HDMI 3D video timing ............33 Supported computer (D-sub/VGA) input signal resolutions...... 33 Setting up appropriate output resolution on a computer....34 Troubleshooting .................35 Table of Contents...
Getting to know your TV Front view Name Description Left and right speakers for reproducing high-quality Speakers stereo audio. Remote control Receives command signals from the remote control. sensor window Power/status • Lights up green when the TV is powered on. indicator •...
Remote control Power / Standby Press this button to power the TV on or put it to the standby mode. Red/Green/Yellow/Blue These buttons are for running special functions. Turns on/off the 3D effect. Enters 3D related OSD menus. (No function) Sleep Timer ( 睡眠定时...
Volume +/- ( 音量 ) Press these buttons to raise or lower the volume level. SRS TruSurround HD ( 环绕音效 ) Press this button to turn on/off the SRS TruSurround HD sound effect. / / / / OK When the OSD (On-Screen Display) menu displays on-screen: •...
Sound mode ( 音效模式 ) Press this button to select a preset sound mode. Confirm -/-- ( 确认 -/--) Press this button to confirm the channel you selected or enter the channel number. Channel ( 频道 ) Press these buttons to sequentially change channels by moving forward or backward.
Remote control usage tips • The remote control must be held at an angle within 30 degrees of the TV's remote control sensor window to function correctly. The distance between the remote control and the sensors should not exceed 6 meters. 6 meters •...
Control panel Name Description Displays the On-Screen Display (OSD) menu if not visible, button MENU or exits the current menu if displayed. • Cycles through input signal sources. button INPUT • In the OSD menu, executes selections or to enter a submenu you have selected.
Name Description Network ( 网口 ) Connects to an RJ45 network cable. Headphone output( 耳机 ) Connects to stereo headphones. Connects to the SPDIF digital audio input of a SPDIF ( 数字光纤 ) connected device. RF IN (Antenna/TV) Connects to an antenna TV/CATV cable system. ( 天线输入...
Initial setup When first time turning on the TV, you will be asked to do the initial setup. Please follow the on-screen instructions to specify the use of TV (family or retail) and complete channel scanning. Resetting to default will also return to the initial setup state. Adjusting aspect ratio The TV can resize and reshape an image to suit your requirements.
Stretches a 4:3 image to 16:9 aspect proportions. Recommended for use when 16:9 viewing video sources which are already in 16:9 aspect such as digital TV and most widescreen DVDs. • Available aspect ratio options are dependent on the type of input signal being selected. When viewing PC input (via D-Sub or DVI), only full screen and wide screen are available for selection.
Picture menu Item Function Selects a picture mode you want to use. Picture Mode This option is not available when the computer D-Sub (VGA) input is in use. Adjusts the screen brightness in a low-light environment. Back Light This option is not available unless the Dynamic Backlight Control in Senseye Setting is disabled.
Page 20
Adjusts settings in Gamma, Dynamic Noise Reduction, MPEG NR, ACE (Automatic Contrast Enhancement), Black Extension, Color Senseye Setting Enhancement, Motion Blur Free, Game Mode, Dynamic Backlight Control, Film Mode, and HDMI RGB Level. Changes the display mode of 3D video source. You can select Off / Virtual 3D / Side-by-Side / Top-and-Bottom.
Sound menu Item Function Sound Mode Selects a sound effect: Standard, Music, Movie, Speech, and User. Adjusts the distribution of sounds between the left and the right Balance built-in speakers. Turns on/off the SRS TruSurround HD sound effect. SRS TruSurround HD™ creates an immersive, feature-rich surround sound experience from two speakers, complete with rich bass, high frequency detail and clear dialog.
TV menu Item Function Press OK > Start Search > OK to start automatic channel Channel Scan scanning. All detected channels will be automatically stored on the Analog Manual Scans TV channels manually. Scan Channel Edit Customizes the number and name of a channel. Favorite Selects the channels you like and make a list, so you can find these Channel...
Time menu Item Function Date Sets up the date. Time Sets up the time. Power On Timer Turns on the Power On Timer. Timer Sets up the time of automatic power on. Power Off Timer Turns on the Power Off Timer. Timer Sets up the time of automatic power off.
Setup menu Item Function Language Selects the language for the OSD menu. Sets up the method of saving power (Off / Low / High / Ambient Energy Saving light). Turns off the TV if no signal is detected for 10 minutes (30 ECO Mode seconds for PC connection).
Page 25
Sets up network related functions (Internet Connection / Information / IP Setting). Ethernet (wired network): 1. Make sure Internet Connection is turned on. 2. Select Ethernet for the interface. 3. Select Auto for IP Setting: Address Type . 4. Select Connection Test . If you can see the message of successful network connection, the network setup is complete.
Viewing images/videos or listening to the music If you have images, videos, or music stored in a USB device, you can view/ listen to them on the TV: 1. Turn on the TV, and then plug a USB device into the USB port of the TV. 2.
Photo playback In the Photo menu, you have the following options: 1. Press / or to select a photo, and then press OK to start playback. 2. In the photo playback mode, press the green button on the remote control to decide the playback duration of each photo; press the yellow button for effects.
, you can fast rewind or fast forward the music playback at 2X speed. 5. To stop the music playback, press . Press the BACK button to quit the music playback mode. Video playback In the Video menu, you have the following options: 1.
Supported component (YPbPr) video timing Horizontal Vertical Dot Clock Timing Resolution Frequency Frequency Frequency (KHz) (Hz) (MHz) 480i 720 x 480 15.735 13.5 480p 720 x 480 31.47 576i 720 x 576 15.625 13.5 576p 720 x 576 31.25 720p50 1280 x 720 37.50 74.25...
• Resolutions outside of these tables are not recognized and will not be displayed. • When you connect the TV to a computer, you should adjust the resolution in the display properties of the computer to closely match the native resolution of the TV. For example, 1920×1080 @ 60Hz.
Troubleshooting There are many external influences and circumstances beyond the control of BenQ which may be causing problems with your TV. Some of the more common and user fixable problems are listed below for your information. Please check the following list before calling your nearest BenQ Customer...
Page 36
Check to make sure that the cables are firmly connected to the terminals on the TV. Ensure that the input signal resolution from the source The cable connection is device (e.g., the computer or TV game console) is correct, but there is supported by the TV (maximum 1080p for HDMI and only sound and no Component Video inputs, and 1920×1080 @ 60Hz for...