Table of Contents
Advertisement
Remote Control
1.
(Power)
Press this button to power on the television. Press
again to put the set into the standby mode.
2.
(Input)
Press this button to select your desired input source.
3.
(Picture)
Press this button to adjust picture intensity.
4.
(Information)
Press this button to display the TV channel message
and other signal messages (including video or com-
puter signals).
5.
(Sleep timer/Teletext page selection)
• Press this button to set the automatic shut-off timer.
• When Teletext is displayed on the screen, press this
button to switch to a specific page.
6.
(TV sound/Teletext page selection)
• Press this button to toggle between stereo and mono
sound reception. During dual language broadcasts
Lang-1 or Lang-2 can be selected.
• When Teletext is displayed on the screen, press this
button to switch to a specific page.
7.
(User situation mode/Teletext page selection)
• Press this button to select from among 6 user situa-
tion modes.
• When Teletext is displayed on the screen, press this
button to switch to a specific page.
8.
(Audio mode/Teletext page selection)
• Press this button to select between Sound 1 (left
audio), Sound 2 (right audio) and Stereo. (Not
available during TV reception)
• When Teletext is displayed on the screen, press this
button to switch to a specific page.
9.
(Teletext display)
Press this button to cycle Teletext display types
between Teletext only - mixed display.
10.
(Teletext index)
Press this button to go to Teletext index page.
11.
(Teletext information)
Press this button to display Teletext information.
17
Remote Control
Advertisement
Table of Contents
