GE ZIS360NXD Installation Instructions Manual page 20

ZKHSS2 Tubular Stainless Steel Handles
This kit provides for the installation of Tubular Stainless Steel
handles on 3/4" overlay custom panels.
TOOLS AND MATERIALS REQUIRED
In addition to the custom door panels, you need:
• #2 Phillipsscrewdriver • Centerpunch
• Drill and 7/32" bit
and 7/8" spade bit
• Safetyglasses
• Hammer
• Pencil
PARTS LIST
8 Handlestandoffs
10 Screws for handle
32x'/" pan head machine
screws (8 required, 2 extra)
3/32" Allen wrench for set screws
10 Plastic spacers standoffs #10-
(8 required,2 extra)
10 Set screws (8 required, 2 extra)
[STEP i] REMOVE DOOR HANDLES
. Open the refrigerator door to 90 °. Remove
the 6 screws holding the handle to the door.
. Remove the 6 screws holding the handle side trim.
Retain all screws and trim. Discard the handle.
. Follow the same procedure to remove the freezer
handle and trim.
20