Weslo Cadence 830 User Manual page 5

HOW TO LOWER THE TREADMILL FOR USE
1. Hold the upper end of the treadmill with your right hand
as shown. Using your left thumb, press the storage latch
and hold it. Pivot the treadmill until the frame and foot rail
are past the storage latch.
2. Hold the treadmill firmly with both hands, and lower the
treadmill to the floor. To decrease the possibility of
injury, bend your legs and keep your back straight.
Closed
Storage
Latch
Catch
12
ASSEMBLY
Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench
and your own phillips screwdriver
Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a
small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a nor-
mal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply
wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.
Handrail Star Washer
Handrail Washer/
Base Leg Washer (43)–8
Screw (2)–6
WARNING:
Do not plug in the
power cord until the treadmill is completely
assembled.
1. Note that the right handrail (not shown) is connected
to the treadmill by a wire harness. During assembly
steps 1 to 3, be careful not to pull on or damage
the wire harness.
With the help of a second person, carefully lay the
treadmill onto its side. Position one of the Base Legs
(62) on the base of the Upright (46) as shown. Make
sure that the Base Leg Pads (63) and the Wheel (68)
are in the indicated positions. Attach the Base Leg
with two Base Leg Bolts (42), two Base Leg Washers
(43), and two Base Leg Nuts (61).
Carefully turn the treadmill onto its other side.
Assemble the other Base Leg (62) as described.
With the help of a second person, carefully raise the
treadmill to the upright position so that both Base
Legs (62) are resting flat on the floor.
and two adjustable spanners .
Base Leg Nut (61)–4
(44)–4
Handrail Bolt/Base Leg Bolt (42)–8
1
42
62
43
46 63
61
5
68