Advertisement
Your Ethernet card is
6
Ethernet jack on your computer and find out if it is empty. The jack looks the same as the jack marked
ETHERNET on the back of the Westell modem.
If your card is a 10Base-T card (10 Megabits per second), or if it is set to 10 Megabits per second, you
7
can install the Westell ADSL modem—see the instructions under "Installation" in this guide. If you are
not sure, consult your Ethernet card manufacturer's documentation.
Windows 2000 Professional
1
Click
, then
Start
Double-click the
2
opens. If you see an error message, your Ethernet card or its driver is not installed, follow your Ethernet
card manufacturer's instructions for installation and configuration to 10 Megabits per second.
Click the
3
Local Area Connection
card that you plan to use with Verizon Online DSL.
If you see more than one Local Area Connection icon, click each one and read the left panel to locate
the one for the Ethernet card.
If you see no Local Area Connection icon for the Ethernet card, install an Ethernet card following the
Ethernet card manufacturer's instructions.
the Local Area Connection icon for the Ethernet card, and click
4
Right-click
menu.
In the Local Area Connection Properties window, verify that the Connect using box contains the name
5
of the Ethernet card. This name might contain words such as Ethernet adapter, Etherlink, or LAN
adapter. Check your Ethernet card manufacturer's documentation if you need to find the exact name of
the card
Your Ethernet card is
6
Ethernet jack on your computer and find out if it is empty. The jack looks the same as the jack marked
ETHERNET on the back of the Westell modem.
If your card is a 10Base-T card (10 Megabits per second), or if it is set to 10 Megabits per second, you
7
can install the Westell ADSL modem. See the instructions under "Installation" in this guide. If you are
not sure, consult your Ethernet card manufacturer's documentation.
if it is not being used for another device. One way to check is to find the
available
, then
Settings
Control Panel
Network and Dial-up Connections
icon and read the left pane to verify that this icon is for the Ethernet
if it is not being used for another device. One way to check is to find the
available
. The Control Panel opens.
icon. The Network and Dial-up Connections window
8
in the drop-down
Properties
030-300108D
Advertisement
