Advertisement
Mounting the ADSL Modem on a wall (Optional)
To mount the ADSL modem on a wall:
Obtain two pan-head screws (one #8 and one #6) and two #4 – #8 wall anchors. (Not provided.)
1
2
With the ADSL modem held up against the wall where it is to be mounted, mark the upper keyhole slot
and screw location.
Drill a 3/16" hole for the upper anchor and insert the anchor and larger (#8) screw until the face of the
3
screw is approximately 3/16" from the wall.
Test-fit the unit on the screw, and adjust the screw depth for a sliding fit.
4
With a pencil, mark the opening in lower mounting tab. Remove the unit from the wall.
5
Drill a 3/16" hole for the lower anchor and insert anchor. Hang the unit on the upper screw.
6
7
Insert the smaller (#6) screw through the hole in the lower mounting tab.
Tighten the lower screw lightly with a screwdriver. Do not overtighten.
8
5
030-300108D
Advertisement
