Playable Discs - Sanyo DVD-SL33 Instruction Manual

Connecting to a digital multi-channel AV amplifier
The digital multi-channel sound of a DVD can best be decoded and
played with a multi-channel AV amplifier (Dolby Digital decoder or
MPEG-2 decoder).
To digital audio input
Optical lead
(not supplied)
The following types of discs can be played on the unit.
Disc type and logo mark
DVD-Video
Audio CD
Region Number
Region number (Regional restriction code) is built-in to the unit and
DVD video discs.
There is a region number on the rear of the unit.
The same region number or region number "ALL" of DVD discs can be
used on the unit.
DVD disc
There are the marks on some DVD disc packages.
Example:
Multiple languages
Multi-languages subtitle
Multi-angle
DVD discs are divided into titles, and the titles are sub-divided into
chapters.
Title 1
v
Chapter 1 Chapter 2 Chapter 3
5
Digital multi-channel AV amplifier

PLAYABLE DISCS

Multi-aspect
Region number
Closed caption
Title 2
Chapter 4 Chapter 5
The AV amplifier has to be able to process the DTS audio signal in
order to play a DVD with DTS. If it cannot, then you will not be able to
hear the DVD.
Note:
Select "Setting digital out" setting as follows. (See Page 14.)
- To enjoy Dolby Digital sound, select "Dolby Digital: BitStream".
- To enjoy DTS sound select "DTS: On".
- To enjoy MPEG-2 sound, select "MPEG: BitStream".
- To enjoy 2 channel digital stereo sound, select "Dolby Digital:
LPCM", "DTS: Off", "MPEG: LPCM".
Notes on the digital socket connection
Before connecting, remove the protective cap from the DIGITAL OUT
socket. Replace the cap if there is not device connected to this socket.
Manufactured under license from Dolby Laboratories.
"Dolby", "Pro Logic" and the double-D symbol are trademarks of Dolby
Laboratories.
"DTS" and "DTS Digital Out" are trademarks of Digital Theater Sys-
tems Inc.
Video CD/Audio CD disc
Video CD/Audio CD discs are divided into tracks.
Track 1 Track 2
Note:
- Only the above types of discs can be played on this unit.
DVD-ROM, CD-ROM, SVCD, CVD, etc. cannot be played.
- The unit can play back the Video CD (VCD).
- This unit can play back the DVD-R that has recorded movie data.
However, some DVD-Rs cannot be played back depending on the
recording conditions.
- The DVD-R that has no movie data cannot be played back.
- This unit is to be used exclusively with the PAL (or NTSC) colour
system discs. SECAM system discs cannot be used with this unit.
For DVD discs: The video output signal format can be selected
("PAL 60" or "NTSC") when playing back the NTSC discs.
- For MP3 CD, please see page 11.
- For Picture/JPEG CD, please see pages 12.
Notes on handling discs
- Do not expose the disc to direct sunlight, high humidity or high
temperatures for extended periods of time.
- Discs should be returned to their cases after use.
Do not apply paper or write anything on the disc surface.
- Handle the disc by its edge. Do not touch the playing surface (glossy
side).
- Fingerprints and dust should be carefully wiped off the playing sur-
face of the disc with a soft cloth.
Wipe in a straight motion from the centre to the outside of the disc.
- Never use chemicals such as record cleaning sprays; antistatic
sprays or fluids, benzene or thinner to clean discs.
v
Track 3 Track 4 Track 5