Sanyo DVD-SL33 Instruction Manual page 5

Before connections
- Do not connect the unit to a VCR directly. The playback picture will be distorted because DVD disc are copy protected.
- When you connect the unit to your TV and other equipment, be sure to turn off the power and disconnect all of the equipment from the wall outlet
until all the connections have been made.
- Please refer to the instruction manuals for the component that you are connecting (TV, AV amplifier, etc.)
Connecting to a TV with the audio/video lead
To AC 110 - 240V,
50/60 Hz
Connecting to a TV with an audio and S-video leads
Please follow these steps before turning on the power.
1. If your TV has an S-video input socket, connect the unit as shown
in figure. (The VIDEO OUT socket connection is not necessary.)
You can enjoy clearer picture playback.
2. Set the VIDEO OUT SELECT switch to S-VIDEO.
Audio lead
(not supplied)
S-video lead
(not supplied)
As an alternative to using he TV's speakers, the sound can also be played back through a HiFi system or an amplifier.
Connecting to a HiFi system with analog two-channel stereo sound
Connecting an audio lead (not supplied) to the AUDIO OUT sockets of the unit and to the appropriate sockets of the HiFi system.
Note:
To enjoy Dolby Pro Logic sound, select "Dolby Digital: LPCM" in "Setting digital out". (See Page 14).
CONNECTIONS
Audio/Video cable (supplied)
TV with Audio and
S-video input sockets
L
AUDIO IN
R
VIDEO IN
S-VIDEO IN
AUDIO
R-AUDIO-L
VIDEO
INPUT
1
Connecting to a TV with an Audio and Component
video leads
Please follow these steps before turning on the power.
1. If your TV has a component video input sockets, connect the unit
as shown in figure. (The VIDEO OUT socket connection is not
necessary.)
You can enjoy clearer picture playback.
2. Set the VIDEO OUT SELECT switch to COMPONENT.
Audio lead
(not supplied)
TV with Audio and
Component video
TV with Audio/Video input sockets
VIDEO
L
AUDIO IN
R
VIDEO IN
COMPONENT VIDEO IN
Y C C
B R
input sockets
Component video lead
(not supplied)
4