Setting Language; Setting Display - Sanyo DVD-SL33 Instruction Manual

Once the initial settings have been completed, the unit can always be
operated under the same conditions.
The settings will be retained in the memory until they are changed,
even if the power is turned off.

Setting Language

1. Press the SETUP button in the stop mode. The setup screen ap-
pears and "Language" is highlighted.
Language Display
2. Press the ENT button. "Language" screen appears.
3. Press the 5 or 4 button to select the item (highlighted).
Example: To set "OSD" (On screen display)
Language Display
OSD
Audio
Subtitle
DVD Menu
"OSD" setting is applied also to VCD and CD.
4. Press the ENT button. The submenu appears.
Example:
Language Display
OSD
Audio
Subtitle
DVD Menu
5. Press the 5 or 4 button to select the language (highlighted).
6. Press the ENT button. The selected language remains.
7. Repeat steps 3 ~ 6 for other items.
Note:
If "Others" is selected, enter the language code. (See "LANGUAGE
CODE LIST" on page 15.)
8. Press the 4 button to skip back to the setup screen (or press the
SETUP button to quit the setup screen).
Notes:
- You cannot switch audio sound track languages if there is only
one language recorded on the disc.
- When you play back a DVD disc, the unit automatically displays
the pre-selected subtitle language if it is included on the disc.
For improvement, on-screen displays subject to change with-
out notice.
13
INITIAL SETTINGS FOR DVD
Digital Out Parental
Digital Out Parental
English
Disc
Disc
Disc
Digital Out Parental
English
English Español
Disc Français
Disc Deutsch
Disc Portugues

Setting Display

1. Press the SETUP button in the stop mode. The setup screen
appears.
Language Display
2. Press the a button to select "Display", then press the ENT button
"Display" screen appears.
Language Display
Dimmer
TV Type
NTSC Disc
3 Press the 5 or 4 button to select the item (highlighted), then press
the ENT button. The submenu appears.
Example: To set "Dimmer".
Dimmer Normal
TV Type 4:3 LB
NTSC Disc PAL 60
4. Press the 5 or 4 button to select the submenu (highlighted).
Example: To select "Dimmer: Dark"
Dimmer Normal
TV Type 4:3 LB
NTSC Disc PAL 60
5. Press the ENT button. (In this example, "Dimmer: Dark" remains.)
6. Repeat step 3 - 5 for other items.
7. Press the 4 button to skip back to the setup screen (or press the
SETUP button).
Dimmer:
Select the display brightness ("Normal" or "Dark").
TV Type:
Select the appropriate setting for your TV screen size.
4:3 LB (Letterbox):
Select when a conventional TV set is
connected. When the wide screen disc is
played, the black bands appear at the top and
bottom of screen.
4:3 PS (Panscan)
Select when it conventional TV set is
connected. When the wide screen disc is
played back, it displays picture cropped to fill
your TV screen. The left and right edges are
cut off.
16:9
Select when a wide screen TV set is
connected, Played in "FULL" size. (Setting the
wide screen TV to "FULL" mode is also
necessary.)
Note:
- The screen size may differ depending on
the DVD discs.
- If you select "16:9" to get rid of the black bands on screen when
wide screen disc is played, picture may be slightly distorted.
- In some discs, even if "4:3 PS" is selected, the black bands may
remain on the screen.
NTSC Disc:
Select the video output signal format to "PAL 60" or "NTSC" when play-
ing back the NTSC discs.
Digital Out Parental
Digital Out Parental
Normal
4:3 LB
PAL 60
Normal
Dark
Normal
Dark
Cut off