Advertisement
Available languages
Available languages
CONTROL PANEL AND FEATURES
Auto Dry/
Less/Noin,
No_mal
Push to Start/
Pousser pour d_marrer
@
Not all features
and options
are available
on all models.
Appearance
may vary.
DRYER CYCLE KNOB
Use your
Dryer Cycle knob to select available
cycles on your
dryer. Turn the knob to select a cycle for your laundry
load.
See "Cycle Guide"
for detailed
descriptions
of cycles.
Timed Dry
Will
run the dryer for the specified
time on the control.
On models
with a selectabie
temperature
knob, you may
choose
a setting
based
on the fabrics
in your load.
Drying
time and temperature
will depend
on your dryer
model.
Auto Dry
Auto Dry cycles give the best drying
in the shortest time.
Drying
time will vary based
on fabric
type,
load size, and
dryness
setting.
Air Only
Use the Air Only
setting
to dry foam,
rubber,
plastic,
or
heat-sensitive
fabrics.
PUSH TO START
Press the PUSH to START button
to start the dryer.
CYCLE GUIDE - AUTO DRY CYCLES
Not all cycles and settings
are available
on all models.
AUTO DRY
- Senses air temperature
and shuts off: when the load reaches
the selected
dryness
level.
Temperature
may
be selected
on cycle
knob. Choose
Normal
to save energy.
Any load
More
Normal
Less
Automatic
cycles
give the best drying
Jn the shortest
time. Drying
time varies
based on load size, and dryness
setting.
NOTE:
if loads
do not seem
as dry as you
would
like, select
More
next time
you dry a similar
load.
if loads
seem drier
than
you like,
select
Less next
time you dry
a similar
load.
CYCLE GUIDE - TIMED DRY CYCLES
Not all cycles and settings
are available
on all models.
TIMED DRY
- Will
run the dryer
for the specified
time on the control.
Tern _erature may be selected
on cycle knob.
Cycle:
J
Cycle Details:
Timed
Dry
Any
Any load
Any load
Touch Up
Any
Rubber, plastic,
Air Only
No heat
heat sensitive
fa brits
Select
a drying
temperature
based on the fabrics
in your
load. If you are unsure of the temperature
to select for
a load, select the lower setting
rather
than
the higher
setting.
This is the last step in a cycle that uses heat. The load is
cooled
slowly
to reduce
wrinkling
and make it easier
to
handle.
Use this cycle to smooth wear
or packing
wrinkles.
Use a Air Only
(no heat) setting
for foam,
rubber,
plastic,
or heat-sensitive
fabrics.
Advertisement
