External Antenna Connector - Verizon Wireless USB1000 Product User Manual

External Antenna Connector

This device is equipped with an external antenna connector.
To access the External Antenna Connector:
1. Locate the External Antenna Connector
2. Remove the rubber protector to expose the
in a safe place for future use in order to protect the
not in use).
Important: This device when used in a mobile configuration with an external antenna option is only authorized for use in laptop
computers that are identical or substantially similar to those in its grant application. A minimum of 20cm (8 inches) of separation
between the external antenna and the users body must be maintained at all times and this device must not be co-located or
operate in conjunction with any other antenna or transmitter except for those described in this filing. In order to comply with
FCC/IC regulations limiting both maximum RF output power, and human exposure to RF radiation, the maximum external
antenna gain must not exceed 2.2dBi in the Cellular or PCS bands of operation. This device is classified as a mobile device with
respect to RF exposure compliance when the external antenna is used.
USB1000 Global Ready Modem HARDWARE USER GUIDE
on the side of the device.
External Antenna Connector. (Keep the rubber protector
External Antenna Connector from debris when
13