Photometric Chart; Troubleshooting - ADJ WIFLY EXR QAI2BAR IP Instruction Manual

WiFly EXR QA12Bar IP
WiFly EXR QA12Bar IP
Dim m er Dim m er
Dim m er Dim m er
1 0 0 1 0 0 1 0 0 1 0 0 % % % %
5 0 5 0 5 0 5 0 % % % %
1 0 1 0 1 0 1 0 % % % %
0 0 0 0
T
ris e
DMX delay
Trise(ms)
Delay mode
dr-0
dr-1
dr-2
dr-3
dr-4
ADJ Products, LLC - www.adj.com - WiFly EXR QA12Bar IP User Manual Page 26

Photometric Chart

Dimmer Curve Chart
T
d o w n
Tdown(ms)
0 0
800 1300
1010 1560
1200 1950
1280 2600
WiFly EXR QA12Bar IP
With this feature you can connect the fixtures to one another
using a IP rated connector cable (sold separately). The quantity
that can be connected is 11 fixtures maximum. After 11 fixtures
you will need to use a new power outlet. They must be the same
fixtures. DO NOT mix fixtures.
WiFly EXR QA12Bar IP
Listed below are a few common problems the user may encounter,
with solutions.
Unit not responding to DMX:
1. Check that the DMX cables are connected properly and are
wired correctly (pin 3 is "hot"; on some other DMX devices
pin 2 may be 'hot'). Also, check that all cables are connected
to the right connectors; it does matter which way the inputs
and outputs are connected.
WiFly EXR QA12Bar IP
Due to fog residue, smoke, and dust cleaning the internal and exter-
nal optical lenses must be carried out periodically to optimize light
output.
1. Use normal glass cleaner and a soft cloth to wipe down the
outside casing.
2. Clean the external optics with glass cleaner and a soft cloth
every 20 days.
t t t t
3. Always be sure to dry all parts completely before plugging
( ( ( ( m s m s m s ) ) ) ) m s
the unit back in.
Cleaning frequency depends on the environment in which the fixture
operates (i.e. smoke, fog residue, dust, dew).
ADJ Products, LLC - www.adj.com - WiFly EXR QA12Bar IP User Manual Page 27
Power Cord Daisy Chain
Trouble Shooting
Cleaning