Setting The Self-Timer - Sanyo KATANA User Manual

Hide thumbs Also See for KATANA:
Table of Contents

Advertisement

Setting the Self-Timer

To activate the self-timer:
1.
From camera mode, select Options > Self-Timer.
2.
Highlight the length of delay you want the timer to use (10 Seconds
or 5 Seconds) and press
3.
Select Start (left softkey) when you are ready to start the timer. (
appears on the upper right portion of the Main LCD during the self-
timer countdown.)
4.
Get ready for the picture. (When the timer is down to three seconds,
the self-timer icon will turn red and the phone will begin to beep.)
To cancel the self-timer after it has started:
Press Cancel (right softkey).
Note:
While the self-timer is active, all keys are disabled except
(right softkey).
Taking Stitch Shots
Stitch Shot allows you to stitch separate images together.With this feature,
your phone's viewfinder is divided in two and you can shoot each part
separately.When you shoot the first part, the camera displays a section of
the previous part, so you can line up the next picture with the first one.
To take a stitch shot:
1.
From camera mode, select Options (right softkey) > Fun Tools >
Stitch Shot.
2.
Select Vertical or Horizontal.
3.
To take the first picture, press
4.
To take the second picture, press
128
Section 2I: Using Your Phone's Built-in Camera
Use your navigation key to switch the stitch display.
.
.
.
,
, and Cancel

Advertisement

Table of Contents
loading

Table of Contents