Setting The Self-Timer - Sanyo MM-8300 Phone Manual

Pcs vision multimedia phone
Hide thumbs Also See for MM-8300:
Table of Contents

Advertisement

Setting the Self-timer

To activate the Self-timer:
1.
From camera mode, press Options (right softkey).
2.
Highlight Self-timer and press
3.
Highlight the length of delay you want the timer to use
(10 seconds or 5 seconds) and press
To deactivate the Self-timer, highlight Off and
press
4.
Press Start (left softkey) when you are ready to start
the timer. (
main LCD during the Self-timer countdown.)
5.
Get ready for the picture. (When the timer is down to
three seconds, the Self-timer icon will turn red and the
phone will begin to beep.)
To cancel the Self-timer after it has started:
Press Cancel (right softkey).
Note:
While the Self-timer is active, all keys are disabled except
, and Cancel (right softkey).
Section 2J: Using Your Phone's Built-in Camera
.
appears on the lower left portion of the
.
.
,
167

Advertisement

Table of Contents
loading

Table of Contents