Assigning Pictures; Camera Mode Options; Zoom; Self-Timer - Sanyo SCP-3810 Operating Manual

Delete to delete the picture you just took.
Details/Edit to edit your picture or display details relating to your pictures.

Assigning Pictures

You can assign a picture as a screen saver or as a picture ID for a Contacts entry.
1. Take a picture.
2. When a picture displayed press OPTIONS (right softkey) > Set as and select an
option.
Picture ID to assign the picture to a Contacts entry. Highlight an entry and press
MENU/OK twice to assign the picture.
Screensaver to assign the picture as a screen saver. Press MENU/OK to assign
the picture.
Tip: You can view the pictures assigned as Picture ID or screen saver by pressing
MENU/OK >
Tools > Assigned Media

Camera Mode Options

Press OPTIONS (right softkey) in camera mode to display additional camera options:
•
Picture Mode to select a picture mode from Normal, Beach/Snow, Scenery, Mirror
Image, or Night/Dark.
•
Zoom to zoom in and out on a subject. (See "Zoom" below.)
•
Self-Timer to activate the camera's timer. (See "Self-Timer" below.)
•
Fun Tools to select an option from the following: (See "Fun Tools" on page 48.)
Multiple Shots to shoot multiple shots. (This menu can not be used when
resolution is set to 1.3M. See "Camera Settings" on page 49.)
Fun Frames to select a fun picture frame to decorate your picture.
Color Tone to select a wide variety of color tones for the picture.
•
Image Controls to set the Brightness, White Balance, Sharpness and Contrast.
•
Camera Settings to select your settings.
•
Review Media to review your pictures in My Albums.
•
Key Guidance to indicate the key functions in camera mode.
•
User Settings to save your own settings and recall them.

Zoom

This feature allows you to zoom in on an object when you take a picture. You can adjust
the zoom from 1x to 12x.
1. From camera mode, press the navigation key right or left.
2. Press the side camera button, MENU/OK, or CAPTURE (left softkey) to take a picture.

Self-Timer

You can set a timer to delay the shutter point. The [Self-Timer] icon appears when it is set.
1. From camera mode, press OPTIONS (right softkey) > Self-Timer.
2. Highlight a delay timing (10 Seconds or 5 Seconds) and press MENU/OK.
3. Press MENU/OK or Start (left softkey) when you are ready to start the timer. (You will
47